327 voie romaine - 24100 LEMBRAS [France]

419 262 886 R.C.S. BERGERAC

☎ +33(0)5 53 22 82 36    ✉ info@tepex-blasting.com

Other site : www.coda.tepex.eu

327 voie romaine - 24100 LEMBRAS [France]

419 262 886 R.C.S. BERGERAC

☎ +33(0)5 53 22 82 36    ✉ info@tepex-blasting.com

Other site : www.coda.tepex.eu

327 voie romaine
24100 LEMBRAS [France]
419 262 886 R.C.S. BERGERAC
☎ +33(0)5 53 22 82 36
✉ info@tepex-blasting.com
Other site : www.coda.tepex.eu

The proposed software allows to view the actual position of the mine hole to adjust the load.

Open the application

This easy-to-use program allows to refine the profiles obtained during step 1 - Implanting the shot. It is enough, for each profile, to enter the value recorded with the TEPEX 2S during step n ° 2 - Check the drilling.

Accessible from the tablet delivered with the profiler (if the latter is equipped with a SIM card) or from any digital medium with Internet access, this application allows, on site, to view the actual position of the mine hole to adjust the load.

When all the profiles making up the drilling have been adjusted, the software proposes to download the modified file. This file will be kept within the framework of quality assurance and may be consulted at any time via this program.

View all profiles contained in a modified file.

Note that the « Profiler » application can also be used to perform this operation (see appendix - Other operations - of the Laser-Tablet Profiler user guide).

© 2020 • TEPEX BLASTING